NOTES:

• E-mail for ordering information
• These triple clamps are made from 6061-T6 aluminum
• Both the lower and upper are thicker than the stock parts for additional rigidity in the front suspension.
• Parts are setup for the stock rake and trail.
• Parts come standard in raw aluminum.  Optional hard coat anodizing available for additional charge.
• The stock lower triple's steering stem is used in the new lower clamp.  This part must be machined out and then permanently modified.  Removal and modification of the steering stem is included with the kits.  The stock lower triple and stem must be supplied.
• Air preload collars can be retained if desired.  Some modification to the air collar may be necessary.