V4 Suspension Linkage
The rear suspension on the Honda Interceptor models were some of the first motorcycles to use a progressive rate rear suspension linkage. These bikes suffered from a very spongy feel for the rear tire and poor tire adhesion. This kit, available for VF1000R/F and VF500F models (others available also, but please e-mail for availability), replaces the stock linkage and requires no other modifications.
The link is used to raise the rear ride height while keeping the stock
rate. This allows better weight distribution for increased traction
and handling.
 |
All parts are made from 7075-T6 Aluminum. Bushings are installed in the part at the pivots and retain the original fasteners. Parts come standard as raw aluminum. Coatings and anodizing such as hard coat anodize, polishing, and color anodizing are available. E-mail for cost and specific needs. Delivery time is approximately four to six weeks. Allow extra time for special options. |
Custom configurations are available. Please e-mail all requests to daugherj@iquest.net. All parts are special order only. Base price is for standard kit that raises the rear ride height. Other variations and modifications are extra and require longer delivery times. |
 |
Note: Parts may not look like what is pictured.