- Line routing under carbs, note orientation of tee fittingThis section is intended to show what the top end oiling system modification looks like when installed. Please note that this is not the only way to route the lines, just the way that I've found best. There is a kit available for this modification, see the Performance Parts Page for ordering information.
The benefits of this are:
Increased valve train life
Decreased internal friction
Increased fuel mileage
The following parts will need to be modified or replaced:
Original oil supply lines (removed)
Original oil supply port blocked
New supply lines installed
Here are some basic pictures showing what the oil system modification looks like once complete.
- Line routing under carbs, note orientation of tee fitting
- Side view. The main oil gallery can be seen in this picture directly
under the output gear.
- Front lower view. This shows where the new supply point is located.
- Second view from the side. This shows the carbs in place.
E-mail me at daugherj@iquest.net
Jamie Daugherty
Daugherty Motorsports
9406 Lower Huntington Rd.
Fort Wayne, Indiana 46809-9746
260.747.8012
This page was last updated Sunday March 29, 2009 .